AIRLESSCO HSS9000 Spezifikationen PDF herunterladen (Seite 10)

1. Be sure the gun safety latch is engaged and there

is no spray tip in the gun. Refer to page 14 on how

to lock the safety latch and the gun's safety features.

FIGURE 4

2. Pour enough clean, compatible solvent into a large,

empty metal pail to ll the pump and hoses.

3. Place the suction tube into the pail.

4. Turn the Prime Valve (Figure 6) to the

"OPEN" priming position.

5. Point the gun into the metal pail and hold a metal

part of the gun rmly against the pail. Refer to Figure 3.

FIGURE 3

MAINTAIN FIRM

METAL TO METAL

CONTACT BETWEEN

GUN AND CONTAINER

6. Disengage the gun safety latch and squeeze the

gun trigger. Turn Pressure Control Knob (Figure 4)

Clockwise to increase pressure just enough to cycle

the pump.

7. Turn the PrimeValve to the "CLOSED" position.

This will allow solvent to be ushed through the pump,

hoses and gun. Allow the unit to operate until clean

solvent comes from the gun.

8. Release the trigger and engage the gun safety

latch.

9. Whenever you shut off the sprayer, follow the

"PRESSURE RELIEF PROCEDURE" (Page 11).

REMOVE SPRAY TIP.

ENGAGE GUN SAFETY

LATCH.

HOW TO FLUSH

To reduce the risk of static sparking

which can cause re or explosion,

always hold a metal part of the gun rmly

against the metal pail when ushing. This

also reduces splashing.

FIGURE 2

FIGURE 4

Hydraulic Pressure Control Assembly

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Keine Kommentare

AIRLESSCO HSS9000 Spezifikationen Seite 10