AIRLESSCO HSS9000 Spezifikationen PDF herunterladen (Seite 18)

SERVICING THE FLUID PUMP

Fluid Pump Removal - Refer to Figure 12

1. Follow the Pressure Relief Procedure page 11.

2. Flush the material you are spraying out of the machine.

3. Remove the Front Cover (119-099).

4. Slip Retaining Ring (116-106) down to expose the

Piston Pin.

5. Push Piston Pin (119-025) out of the piston pin hole.

6. Loosen Jamb Nut (187-088) until the Fluid Pump can

unthread from the Yoke (186-078).

Hydraulic Motor

Front Cover

Piston Pin

Retaining Road

Jamb Nut

Yoke

186-100

119-099

119-025

116-106

187-088

186-078

ITEM # PART # DESCRIPTION

FIGURE 12 PARTS LIST

Disassembly of the Fluid Pump - Figure 19

1. Remove Fluid Pump from machine - Refer to Fluid

Pump Removal, Page 16.

2. Remove Inlet Valve Assembly - Refer to Servicing Inlet

Valve, Page 18.

3. Remove Upper Packing Adjustment nut (187-071) from

Outlet Housing (187-076).

4. Remove Pump Cylinder (187-077) from Extension

Tube (187-102), pulling Displacement Rod (187-070)

out through bottom of Outlet Housing. Discard O-ring

(106- 004).

5. Remove Outlet Housing from Extension Tube. Discard

O-ring (106-004).

6. Remove all old packings and glands from Outlet

Housing; retain Male Gland (187-073) and Female

Gland (187-072), they will be re-used unless damaged.

7. Remove Piston End (187-078) from Rod Extension

(187-101).

8. Remove Jam Nuts (187-089 x 2) from Piston End. Remove

all old packings, glands and Scraper (187-083) from Piston

End; retain Male Gland (187-073) and Female Gland

(187-072), they will be re-used unless damaged.

9. Disassemble Outlet Valve - Refer to Servicing Outlet

Valve, Page 17.

10. Inspect Displacement Rod and Cylinder inside surface

for wear or damage; thoroughly clean all parts to be re-

used.

FIGURE 12

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

AIRLESSCO HSS9000 Spezifikationen Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spritzpistole AIRLESSCO HSS9000