AIRLESSCO HSS9000 Bedienerhandbuch PDF herunterladen (Seite 5)

WARNINGS - CONTINUED

Hazardous uid or toxic fumes can cause serious injury or

death if splashed in eyes or on skin, inhaled or swallowed.

Know the hazards of the uid you are using. Store &

dispose of hazardous uids according to manufacturer,

local, state & national guidelines.

ALWAYS wear protective eyewear, gloves, clothing

and respirator as recommended by uid manufacturer.

Tighten all uid connections securely before each use. High

pressure uid can dislodge a loose coupling or allow high

pressure spray to be emitted from the coupling and result in

an injection injury or serious bodily injury.

Only use a hose that has a spring guard. The spring guard

helps protect the hose from kinks or other damage which

could result in hose rupture and cause an injection injury.

NEVER use a damaged hose, which can result in hose

failure or rupture and cause in injection injury or other

serious bodily injury or bodily damage. Before each use,

check entire hose for cuts, leaks, abrasion or bulging of

cover, or damage or movement of couplings. If any of these

conditions exist, replace the hose immediately.

NEVER use tape or any device to try to mend the hose

as it cannot contain the high pressure uid. NEVER

ATTEMPT TO RECOUPLE THE HOSE. High pressure

hose is not recoupleable.

Help prevent damage to the hose by handling and routing

it carefully. Do not move the sprayer by pulling it with the

hose.

Ground the sprayer and other components in the system

to reduce the risk of static sparking, re or explosion which

can result in serious bodily injury and property damage.

ALWAYS GROUND ALL OF THESE COMPONENTS:

1. Sprayer: Connect a ground wire and clamp (supplied) to

a true earth ground.

2. Fluid Hose: use only grounded hoses.

3. Spray gun or dispensing valve: grounding is obtained

through connection to a properly grounded uid hose

and pump.

4. Object being sprayed: according to your local code.

5. All solvent pails used when ushing should only be

metal pails which are conductive.

Once each week, check electrical resistance of hose (when

using multiple hose assemblies, check overall resistance of

unpressurized hose must not exceed 29 megohms (max)

for any coupled length or combination of hose lengths. If

hose exceeds these limits, replace it immediately.

Never exceed 500 Ft. (150 m.) overall combined hose

length to assure electrical continuity.

Keep clear of moving parts when starting or operating

the sprayer. Do not put your ngers into any openings

to avoid amputation by moving parts or burns on hot

parts.Precaution is the best insurance against an

accident.

When starting the engine, maintain a safe distance

from moving parts of the equipment.

Before adjusting or servicing any mechanical part

of the sprayer, follow the PRESSURE RELIEF

PROCEDURE on page 9, and remove the ignition

cable from the spark plug to prevent accidental

starting of sprayer.

TOXIC FLUID HAZARD

WARNINGS CONTINUED ON NEXT PAGE.........

HOSES

KEEP CLEAR OF MOVING PARTS

GROUNDING

ALWAYS be sure all equipment and objects being sprayed

are properly grounded. ALWAYS ground sprayer, paint

bucket and object being sprayed. See "grounding" above,

for detailed grounding information.

Vapors created when spraying can be ignited by sparks.

To reduce the risk of re, always locate the sprayer at least

20 feet (6 m.) away from the spray area. DO NOT plug in

or unplug any electrical cords in the spray area, which can

create sparks, when there is any chance of igniting vapors

still in the air. Follow the coating & solvent manufacturers

safety warnings and precautions.

Use only conductive uid hoses for airless applications. Be

sure gun is grounded through hose connections. Check

ground continuity in hose & equipment. Overall (end to

end) resistance of unpressurized hose must not exceed 29

megohms for any coupled length or combination of hose

length. Use only high pressure airless hoses with static

wire approved for 3300 psi.

PREVENT STATIC SPARKED FIRE/ EXPLOSIONS

1 2 3 4 5 6 7 8 9 10 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

AIRLESSCO HSS9000 Bedienerhandbuch Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spritzpistole AIRLESSCO HSS9000